OK I have sent a final email with prices/postage and details etc to everyone on my list. The current list is here

If you're not here you're not on my list...



The details are as follows....

In reply to:

---

Sorry for the delay guys but I'm about to order the connectors.

This page lists the current requests. It's only on a permanent
56k dial up so be gentle please

http://www.pdd.edmi.com.au/empegconnectors.html

Prices are a little rough but will be within a dollar. If you
want to change let me know and I will update the above page
with your new cost. I have basically done everything to the
cent and rounded up to the dollar since everyone has something
different.

Rough Prices:
Standard connector with all 24 pins is US$13 or A$22

Connector with harness is the cost of one connector + US$18 or A$30
A harness will consist of
Front RCA preamp out connectors
Rear RCA preamp out connectors
Aux In RCA preamp in connectors
3AG fuse holder with 3A fuse in the battery line
DB9 Serial port connector
Labelled power/mute/headlight wiring (with colours as close as
possible to original)

A harness will be missing:
Microphone connector
Tuner connector
ISO connector
Noise Filter

Reasoning: The Microphone connector isn't used by anything. I
assume anyone who has a spare tuner will already have a sled
and apparently Patrick's tuners are coming with flying leads
so a connector is your own choice. If you are building a tuner
you should be able to get a suitable plug and socket. The ISO
connector doesn't seem to be used that much. I couldn't source
a suitable noise filter. All unused pins for the tuner and the mic
connector will be packed loosely so if you wish to add them your
self you will be able to.

If you want extra pins tell me and I'll punch it into the spread
sheet and update the page. That's the easiest way to do it. The pins
are about US40c / A75c each. I am keeping it to whole dollar values

World Postage (inc NZ):
US$5 for up to 3 connectors (w/o harnesses)
US$7 per 1 connector with a harness

Aus Postage
A$5 for up to 3 connectors (w/o harnesses)
A$5 per connecter with harness

I am not initially taking money yet however if you wish to
pay up front it would be greatly appreciated. I will ship
in order of payment which is relavent for the harnesses.
Paypal ([email protected]) is the only method
I can easily accept outside Australia. Within Australia
I can take a direct debit (contact me for details). That's
why I have the A$ and the US$ prices.

Please check your details on the page and let me know if anything
seems wrong or you wish to change something. People with a ???
could you please clarify if I have guessed correctly.

Again sorry for the delay.

---