Easy.

Gutting the case is very easy.

Cutting the case i used a jigsaw, with a diamond blade.

The bit of the case left above the sled is a bit flexible all still fits ok.

The fan is wired to the AMP power line, and tis mounted to the top on 2 bits of soft rubber tubing to prevent vibration.

Doing the RJ45 plug took a while, used a pc case blanking plate for the mount, and trimmed down the corners of the RJ45, fits fine every time.

The other connector is optical for the ethernet light to the front of the case.

I used the Sled connector for power.

Took about 6 hrs to do.

C.