WORKS!

empeg-car bootstrap v1.00 20000601 ([email protected])
On DC power, quick boot

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v389 (root@ibbm) (gcc version 2.95
.3 20010315 (release)) #2 Thu May 6 16:13:00 EDT 2004
Processor: Intel StrongARM-1100 revision
Checking for extra DRAM at c0c00000: wrote 00000000, read c00e78e0
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 7, serial number 80000558)
Command line: mem=12m noinitrd
Calibrating delay loop... 207.67 BogoMIPS
Memory: 10960k/12M available (980k code, 20k reserved, 324k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 20706d65 'emp ': [<c002a6d4>] lr : [<c00
Found custom animation at offset 0x98b80
Tuner: loopback=1, ID=-1 : c00037ec ip : 400000
Forced AC/Home mode 00000000 r4 = 000
empeg display initialised.
empeg dsp audio initialised
c0003a60:
r10: 0
empeg dsp mixer initialised 00000000Function entered a
empeg dsp initialisedc00
empeg audio-in initialised, CS4231A revision a0
r7 : c0ffafe0 r6 : c01597
empeg remote control/panel button initialised.a80: 0082000
empeg usb initialised, PDIUSBD12 id 1012
Function entered at [<c003376
empeg state support initialised 0089/88c1 (save to d0005100).r1 : c0157f28 r0 : 000000097, serial n
empeg RDS driver initialised
r10 = 00
empeg power-pic driver initialised (first boot)

hda: IC25N080ATMR04-0, 76319MB w/7884kB Cache, CHS=9729/255/63
Process swapper (pid: 1, stackpage=c0003000)
empeg-flash driver initialized r10 = C0003C54 r9 = 00000140
smc chip id/revision 0x3349
Stac
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected]) c002a50 r5 = 00

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:10:02:2
e
Partition check:
Func
empeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
Timezone: /usr/share/zoneinfo/Atlantic/South_Georgia
Hijack: intercepting config.ini

hijack: removed menu entry: "Serial Port Assignment"
khttpd: listening on port 80
kftpd: listening on port 21
Using non-standard cache size 38 (adjustment 12)
player.cpp : 564:empeg-car 3.00-alpha7 2004/02/13.
Prolux 4 empeg car - 2.1490 Feb 13 2004
Vcb: 0x4032e000