Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 13 of 14 < 1 2 ... 11 12 13 14 >
Topic Options
#87989 - 07/08/2002 04:35 Re:Tuners, empeg, for the use of (status update 2) [Re: Derek]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
No, it's totally through-hole construction. Some of the components (resistors, mainly) are pretty small due to lack of space on the board(s), but there is no surface mount assemble involved.

pca
_________________________
Experience is what you get just after it would have helped...

Top
#87990 - 07/08/2002 04:37 Tuners, empeg, for the use of (status update 3) [Re: pca]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
Look what just turned up on my desk...

pca


Attachments
108212-DSCF0026.JPG (385 downloads)

_________________________
Experience is what you get just after it would have helped...

Top
#87991 - 07/08/2002 04:50 Re: Tuners, empeg, for the use of (status update 3) [Re: pca]
pgrzelak
carpal tunnel

Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
Ooooh!!!!
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs

Top
#87992 - 07/08/2002 04:51 Re: Tuners, empeg, for the use of (status update 3) [Re: pgrzelak]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
Ahhhhh!!!

pca
_________________________
Experience is what you get just after it would have helped...

Top
#87993 - 07/08/2002 05:06 Re: Tuners, empeg, for the use of (status update 3) [Re: pca]
CrackersMcCheese
pooh-bah

Registered: 14/01/2002
Posts: 2489
Patrick, is there going to be a signing-up sheet on here? Or a separate website. Will this be the 1st place to look in any case?

Top
#87994 - 07/08/2002 05:26 Re: Tuners, empeg, for the use of (status update 3) [Re: CrackersMcCheese]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
The way it's probably going to work is that I will set up a website with information, downloads, and order taking as soon as I am ready to start shipping. The credit card facilities I will start with are explicitly not usable via the web, IE they say that I am not allowed to accept CC numbers via email. It has to be done via mail or phone. The secure web site CC facilities cost considerably more if the turnover isn't very large, and at least at first I'm trying to keep the costs down.

However, in many ways this is a good thing. It is at least more secure. I will take orders via email, inculding a vaild phone number and time offset. When the order is ready to go out, I will phone the person in question and get the CC number, charge it, and ship the product. This pretty much assures that the number can't go adrift in the net, and that I haven't been given a fraudulent number.

Anyway, I am still waiting for PCBs, which will be a couple of weeks. I'll announce the availability of the tuners here when they're ready.

pca
_________________________
Experience is what you get just after it would have helped...

Top
#87995 - 07/08/2002 06:09 Re:Tuners, empeg, for the use of (status update 2) [Re: lofreq]
JaBZ
addict

Registered: 08/08/2001
Posts: 452
Loc: NZ
no probs dude, Im in NZ too, I can probably assemble it for you, along wiv da fee, I work for a laptop repair co, we do board level repairs as well, so have most equipment at work.

I however already have a original Tuner for my empeg, however will think about this one since it has more features
but depends on price for me.

cheers,
Jai

Top
#87996 - 07/08/2002 07:30 Re: Tuners, empeg, for the use of (status update 3) [Re: pca]
TommyE
enthusiast

Registered: 08/06/1999
Posts: 356
Loc: NORWAY
Hoho, crazy man...

TommyE

Top
#87997 - 07/08/2002 12:16 Re: Tuners, empeg, for the use of (status update 3) [Re: pca]
AlB
member

Registered: 06/02/2002
Posts: 149
Loc: SF
Ummm Mine would be the one in the lower right hand corner. If you look really close you will see my name on it ;0)

Top
#87998 - 07/08/2002 13:41 Re: Tuners, empeg, for the use of (status update 3) [Re: pca]
andym
carpal tunnel

Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
I think I'm going to have to start monitoring this thread on a minute by minute basis! Don't want to miss out on this one...
_________________________
Cheers,

Andy M

Top
#87999 - 07/08/2002 20:17 Re:Tuners, empeg, for the use of (status update 2) [Re: Derek]
lamer
journeyman

Registered: 30/01/2002
Posts: 87
Loc: Texas
What? No SOT-23's or 0402 SMT resistors? Where's the fun in that ?
_________________________
MK2a 160GB

11 Years later, these Mk2a units still rock...

Top
#88000 - 08/08/2002 10:32 Re:Tuners, empeg, for the use of (status update 2) [Re: lamer]
maczrool
pooh-bah

Registered: 13/01/2002
Posts: 1649
Loc: Louisiana, USA
In reply to:

What? No SOT-23's or 0402 SMT resistors? Where's the fun in that ?




Take a crack at our unassembled digital output board kits when they become available later this month. No 0402 SMD resistors or caps, but plenty of 0805s and even an SOT-23. Should be great fun for you .

Stu
_________________________
If you want it to break, buy Sony!

Top
#88001 - 08/08/2002 12:56 Re:Tuners, empeg, for the use of (status update 2) [Re: pca]
elvis
enthusiast

Registered: 18/01/2002
Posts: 270
Loc: Arizona USA
So the real question is.......

Where should I send the money?
_________________________
Elvis

Top
#88002 - 08/08/2002 13:04 Re:Tuners, empeg, for the use of (updated update) [Re: Waterman981]
elvis
enthusiast

Registered: 18/01/2002
Posts: 270
Loc: Arizona USA
In reply to:

I am thinking more and more of Carmegeddon right now




Does anyone remember the 007 aston martin in 'The Living Daylights"?

He had missiles mounted under the bumper and used his radio to aim them. The controls on the Rio Car are just about perfect for something like that.

We could use the serial interface to control the firing hardware, and the nic to recieve simplified IR data......
_________________________
Elvis

Top
#88003 - 09/08/2002 09:02 Re: Tuners, empeg, for the use of [Re: pca]
NasalGoat
member

Registered: 23/08/1999
Posts: 129
Loc: Toronto, ON, Canada
When it's time for the signup, please PLEASE PLEASE put it in a new thread and let this one die.

Top
#88004 - 09/08/2002 18:37 Re: Tuners, empeg, for the use of [Re: NasalGoat]
canuckInOR
carpal tunnel

Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
New thread? Never. This is the Thread That Will Not Die. It's the Jason Voorhees of the bbs.

Speaking of which, it seems Freddy vs. Jason got the greenlight to begin production.

Top
#88005 - 13/08/2002 20:03 Re: Tuners, empeg, for the use of [Re: canuckInOR]
fink08
journeyman

Registered: 15/02/2002
Posts: 79
Looks very impressive PCA. By the looks of the thread it seems that 72 tuners might not be enough. I would request 3 for myself Keep up the good work.

Top
#88006 - 14/08/2002 07:53 Re: Tuners, empeg, for the use of [Re: fink08]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
Oh, I'm going to make more than that, don't worry. I'm just starting out small for reasons of financial stability.

pca
_________________________
Experience is what you get just after it would have helped...

Top
#88007 - 14/08/2002 08:11 Re: Tuners, empeg, for the use of [Re: pca]
Phireman19
member

Registered: 15/06/2002
Posts: 127
So any date when the tuners will be ready ?????
Do I have to sign up for one or how do I go about gettin one?

Thanks guys!

Top
#88008 - 14/08/2002 08:30 Re:Tuners, empeg, for the use of (updated update) [Re: eternalsun]
Tim
veteran

Registered: 25/04/2000
Posts: 1525
Loc: Arizona
It is now officially impossible to find anything in this thread

Is somebody talking about building an accelerometer pcb?

Top
#88009 - 14/08/2002 09:17 Re:Tuners, empeg, for the use of (updated update) [Re: Tim]
canuckInOR
carpal tunnel

Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
It is now officially impossible to find anything in this thread

Flat mode rules!

Top
#88010 - 14/08/2002 14:33 Re:Tuners, empeg, for the use of (updated update) [Re: canuckInOR]
Tim
veteran

Registered: 25/04/2000
Posts: 1525
Loc: Arizona
I agree, but that's why I couldn't find any specific info on the accelerometer that people were talking about (the FlanceDoor people being flattened posts).

Top
#88011 - 14/08/2002 17:43 Re:Tuners, empeg, for the use of (updated update) [Re: Tim]
Satan_X
enthusiast

Registered: 22/03/2002
Posts: 251
Loc: Ramsey, NJ
Damn, this thread needs it's own forum...
_________________________
VW R32 Empeg 50gig 'Stormy 3 has snuck in a dodgeball' - Stormy 1

Top
#88012 - 14/08/2002 20:49 gyros that's the ticket [Re: Tim]
gbeer
carpal tunnel

Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
How about adding one, or three, of those cheep gyros used in radio control helicopters?
_________________________
Glenn

Top
#88013 - 14/08/2002 22:58 Re: gyros that's the ticket [Re: gbeer]
Tim
veteran

Registered: 25/04/2000
Posts: 1525
Loc: Arizona
Thats an idea. I would love to see something like an accelerometer for the empeg... that would just be a blast to screw around with.

Top
#88014 - 16/08/2002 03:28 Re: Tuners, empeg, for the use of [Re: pca]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
there are news for the tuner?
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
#88015 - 18/08/2002 07:42 Re: Tuners, empeg, for the use of [Re: pca]
rdunmow
new poster

Registered: 21/03/2002
Posts: 6
I too would be interested in a Tuner.

Richard

Top
#88016 - 18/08/2002 09:04 Re:Tuners, empeg, for the use of (status update 2) [Re: lofreq]
smu
old hand

Registered: 30/07/2000
Posts: 879
Loc: Germany (Ruhrgebiet)
Hi.

Just wanted to repeat my offer to assemble tuners for others. I expect a fee of 30-40$ would be fair. So I offer the assembly of a tuner for 40$ including worldwide shipping. Any additional tuner will be 5$ less, starting with the 5th tuner, each tuner will be assembled for 30$.
I advise that everyone who does not assemble the kit on his own tries to find someone either in his own country or in the European Community do to it for him. This way, the tuner wouldn't need to pass through customs twice, possibly increasing the cost considerably. US citizens might be able to have a Canadian assemble the kit for them and vice versa for the same reason.
This being said, I happen to be in the EC.
I am accepting credit card payments through paypal at an additional fee of 1$ for each tuner.

cu,
sven
_________________________
proud owner of MkII 40GB & MkIIa 60GB both lit by God and HiJacked by Lord

Top
#88017 - 18/08/2002 09:23 Re:Tuners, empeg, for the use of (status update 2) [Re: smu]
nikko
member

Registered: 15/01/2002
Posts: 122
Um.....can someone tell me if these things are actually available yet? I can't figure that out. This thread is a bit unwieldy.

Top
#88018 - 18/08/2002 09:28 Re:Tuners, empeg, for the use of (status update 2) [Re: nikko]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
They are not. I imagine you will see a big announcement when they become available.
_________________________
Bitt Faulk

Top
Page 13 of 14 < 1 2 ... 11 12 13 14 >