is this error releted to a dying HDD or a bad cable?
hda4 is mounted.
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:06 (hda), sector 12
hda: status timeout: status=0xd0 { Busy }
hda: drive not ready for command
ide0: reset: success
I also go this error when i tried to do a fsck
Flags: nzcv IRQs on FIQs on Mode USER_32 Segment user
Control: D03AD17D Table: D03AD17D DAC: 00000015
init(1): memory violation at pc=0x00000000, lr=0x02007140 (bad address=0x0000000
0, code 2)
pc : [<00000000>] lr : [<02007140>]
sp : 00000000 ip : bffffd88 fp : 00000000
r10: bffffe98 r9 : 00000000 r8 : 0203d938
r7 : bffffdac r6 : 0202ed90 r5 : 00000015 r4 : 00000000
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000015